F&E

Stand der Technik

Xenon-Lichtbogentest

Xenon-Lichtbogentest

Es ist wichtig, genau zu wissen, welches Material nach 10 Jahren besser ist, jedoch ist dies eine lange Zeit für einen Versuch.

Eine Möglichkeit, das Verhalten verschiedener Materialien unter Einfluss von Sonnenlicht und Feuchtigkeit schnell zu vergleichen, ist der Einsatz einer Xenon-Prüfkammer.

Nudec I+D+i
Prueba de-impacto

Haze-gard

Dieses Gerät hat drei Funktionen und kann Folgendes messen:
  • Lichtdurchlässigkeit: Das Licht, das durch die Platte geht und in Prozent gemessen wird. Daher ist es der Prozentsatz des Lichts, der auf die Platte fällt, abzüglich des reflektierten und des absorbierten Lichts.
  • Haze (Nebel): Trübung und/oder Kristallisationsgrad der Platte. Das Licht wird in alle Richtungen gestreut, was zu Kontrastverlusten führt.
  • Klarheit (Auflösung): Eine hochwertige Platte ist eine Platte, die eine hohe Auflösung des Bildes ermöglicht, das durch sie gesehen wird.

Tensiometer

Das Tensiometer ermöglicht es, die Spannung, der die Kunststoffplatte ausgesetzt ist, anhand ihrer spektralen Färbung zu untersuchen und zu kontrollieren.

Nudec I+D+i Tensiometro
Nudec I+D+i

Thermoformer

Unsere Materialien sind thermoformbar, das heißt, wir erhitzen die Platte durch unseren Thermoformer, um sie formbar zu machen, erzeugen eine Blase mit Druckluft und geben ihr dann ihre Form.

Schlagtest

v
Um dieser Norm zu entsprechen, unterzieht NUDEC seine Trennplatten chemischen Beständigkeitstests und harten Schlagtests Kollision mit einem 45-kg-Sack (entspricht dem Gewicht eines laufenden Kindes, das damit kollidiert). Daher muss der Test pro Seite 4 Mal wiederholt werden, um die Schlagfestigkeit zu zertifizieren.

Nudec I+D+i
Nudec i+d+i Colorimetro

Kolorimeter

Die Kontrolle der Färbung der Platten ist grundlegend. Das Kolorimeter ermöglicht die Bestimmung der Plattenfarbe anhand der Koordinaten a (Grün-Rot-Trend), b (Blau-Gelb-Trend) und des Yellowness Index (YI).

Technological development

Project 422

NUDEC, S. A. has carried out a project to improve energy efficiency in its facilities at the Polinyà production center. The project consists in 1 performance: Incorporation of a high energy efficiency extrusion line, replacing an extrusion line that had regular energy efficiency.

This action has led NUDEC, S.A. to carry out an investment of €1,193,200.00.

This project has received a grant of €205,833.87 through the INSTITUTE FOR DIVERSIFICATION AND ENERGY SAVING (IDAE), aid co-financed by the European Union through the ERDF Operational Program for Intelligent Growth 2014-2020.

Nudec Proyecto 422

CDTI project called: Development of diffuser elements made up of specialized layers that allow high optical quality at a reduced cost.

Project reference: IDI-20151059

Objective of the project: NUDEC is a company with extensive experience in the manufacture of plates of thermoplastic materials for applications such as covers, protection screens and acoustic barriers, mainly. Currently, a growing sector is the market for diffusers for luminaires.

The objective of this project is to develop a diffuser with materials with excellent optical and mechanical properties and a much higher resistance to fire.

Results of the project: The project has been a success and the main results obtained are:

Obtaining plates that fully meet the requirements of the new product:

  • Light transmission: 75 – 80%
  • Clarity: <8
  • High diffusion capacity.
  • Very white tonality sheet (white snow ).
“PROJECT CO-FINANCED BY FEDER IN THE FRAMEWORK OF THE INTELLIGENT GROWTH OPERATIONAL PROGRAM 2014-2020”
Logo Unión Europea

Project
PROCEEDING ICA012/19/000171

NUDEC, S. A. has received aid for its energy saving and efficiency project „Improvement of extrusion line 6“ co-financed by the European Regional Development Fund (ERDF), coordinated by IDAE and managed by the autonomies, charged to the National Efficiency Fund Energy, with the aim of achieving a cleaner and more sustainable economy. An energy saving and efficiency project has been developed, a modification of an extruder line to improve its energy efficiency. Thanks to the project, 22.6 teps are saved per year.

Nudec Proyecto L6